Because stainless steel plates are relatively expensive, the application is not so much, but now, with the advancement of technology and the continuous improvement of performance quality, the cost performance of stainless steel plates is relatively better, and now some areas with higher construction requirements are required. The stainless steel plate will be chosen as the choice.
For the roof structure of a building, its service life and appearance should be equally valued. In the airport restaurant, in order to make the roof beautiful, the exhaust fan is covered with stainless steel. When choosing a covering material, special emphasis is placed on the non-reflective properties of the material. The selected village material is 304 stainless steel plate, rough polished, low reflectivity, 6 grade finish. The choice of light intensity is particularly noticeable, especially due to glare, which prevents the pilot from looking at the destination when landing.
The stainless steel plates are surface-finished, and the walls of some buildings are made of 304 stainless steel plates and 8K mirror-polished stainless steel. The interconnected stainless steel plates are polished and tinted to give the walls consistent color and reflectivity. In order to prevent grease stains, the exposed portion of the large-area stainless steel plate is installed in a thick interlayer composed of a galvanized sheet and a compression plate. The polished stainless steel plate is bonded to the galvanized steel sheet with an epoxy resin as a binder.
|External shading/ecological curtain wall|
|Stainless steel bridge|
|Stainless steel exterior/facade|
|Stainless steel roofing and siding|
|Stainless steel exterior panel|
|Stainless steel roof|
Would you like more information about fiber laser cutting machine?Contact Us
Which metal products do you want to make?
Examples of applications
Because of the high corrosion resistance of stainless steel, it can make all kinds of structural components maintain the engineering integrity permanently, and is widely used in various buildings and machinery by the vast number of architects and machinery manufacturers.
Fiber cutting machine stainless steel cutting attention:
Important process parameters that affect the quality of the cut include cutting speed, laser power, assist gas, focus position, nozzle characteristics, and material properties. It can be seen that there are many factors affecting the laser cutting process. If the control is improper or the parameters are not accurate, the cutting precision and cutting quality will be greatly affected. In actual processing, how to accurately, quickly and effectively master the above-mentioned key factors affecting the quality of fiber cutting is very important.
The following is a description of the causes of the problems seen in the actual cutting process of commonly used materials, and propose corresponding solutions.
Laser cutting stainless steel principle
Laser-cut stainless steel is a melt-cutting process in laser cutting. When laser-melting and cutting, laser heating is used to melt the metal material. The auxiliary gas is usually a non-oxidizing gas such as nitrogen, argon or helium, which is used to blow away the melting caused by cutting. The slag is a smoother cut surface; the required energy is only 1/10 of the vaporization cut. Laser melt cutting is mainly used for the cutting of some non-oxidizable materials or active metals, such as stainless steel, titanium, aluminum and their alloys.
Stainless steel and other molybdenum-containing stainless steel chloride ion (sea salt and snowmelt salt) and the ability to enhance the corrosion of pollutants, have better resistance to pitting corrosion and crevice corrosion performance, which is very useful to prevent corrosion caused by salt and corrosive pollutants. Therefore, for in coastal or de-icing salt environment, industrial pollution of the environment and other corrosive environment, design life requirements of 40 or more years of building, structure, transport facilities, parking facilities, sculpture, and other applications, molybdenum stainless steel is the ideal material selection, it can not only to life with building structure, and if properly selected, can minimize maintenance requirements, by the mainstream of architectural design, landscape design companies and construction engineering company.See more features
Advantage of stainless steel:
Stainless steel is favored because:
Excellent corrosion resistance of stainless steel
High strength, good formability,
Excellent shock resistance, explosion resistance and seismic resistance
Good wind and fire resistance
The variety, color and pattern of the surface are very rich
Available in all sizes and forms
Simple maintenance and easy repair
Long service life
Green environmental protection, with good sustainability